J511 TO-92 2L ROHS

J500 SERIES CURRENT REGULATING DIODES FEATURES REPLACES SILICONIX/VISHAY J500 SERIES WIDE CURRENT RANGE 0.192 to 5.6mA BIASING NOT REQUIRED VGS = 0V ABSOLUTE MAXIMUM A A K K RATINGS1 @ 25 °C (unless otherwise stated) Maximum Temperatures Storage Temperature -55 to 150°C Junction Operating Temperature -55 to 150°C Maximum Power Dissipation Continuous Power Dissipation @25°C 350mW Maximum Currents Forward Current 20mA Reverse Current 50mA Maximum Voltages Peak Operating Voltage POV = 50V COMMON ELECTRICAL CHARACTERISTICS @ 25 °C (unless otherwise stated) SYMBOL CHARACTERISTIC MIN Voltage6 TYP MAX UNITS 50 CONDITIONS POV Peak Operating V IF = 1.1IF(max) VR Reverse Voltage 0.8 V IR = 1mA CF Forward Capacitance 2.2 pF VF = 25V, f = 1MHz SPECIFIC ELECTRICAL CHARACTERISTICS @ 25 °C (unless otherwise stated) Forward Current3 IF(mA) Dynamic Impedance4 Zd(MΩ) Knee Impedance Zk(MΩ) VF = 25V VF = 6V PART VF = 25V Limiting Voltage5 VL(V) IF = 0.8IF(min) MIN NOM MAX MIN TYP TYP TYP MAX J500 0.192 0.24 0.288 4.00 15 2.50 0.4 1.2 J501 0.264 0.33 0.396 2.20 10 1.60 0.5 1.3 J502 0.344 0.43 0.516 1.50 7 1.10 0.6 1.5 J503 0.448 0.56 0.672 1.20 5 0.80 0.7 1.7 J504 0.600 0.75 0.900 0.80 3.5 0.55 0.8 1.9 J505 0.800 1.00 1.200 0.50 2. 0.40 0.9 2.1 J506 1.120 1.40 1.680 0.33 1.5 0.25 1.1 2.5 J507 1.440 1.80 2.160 0.20 1 0.19 1.3 2.8 J508 1.900 2.40 2.900 0.20 0.7 0.13 1.5 3.1 J509 2.400 3.00 3.600 0.15 0.5 0.09 1.7 3.5 J510 2.900 3.60 4.300 0.15 0.4 0.07 1.9 3.9 J511 3.800 4.70 5.600 0.12 0.3 0.05 2.1 4.2 Linear Integrated Systems • 4042 Clipper Court • Fremont, CA 94538 • Tel: 510 490-9160 • Fax: 510 353-0261 Doc 201126 02/03/2021 Rev#A10 ECN# J500 Series V-I CHARACTERISTICS CURRENT REGULTING DIODE IF Zk rDS IF VL VR POV VF VR IR PACKAGING DETAILS Notes 1. Absolute maximum ratings are limiting values above which serviceability may be impaired. 2. Pulsed, t = 2ms. Steady state currents may vary. 3. Pulsed, t = 2ms. Continuous currents may vary. 4. Pulsed, t = 2ms. Continuous impedances may vary. 5. Min VF required to ensure IF = 0.8IF(min). 6. Max VF where IF = 1.1xF(max). is guaranteed. Pulsed test ≤2ms. Information furnished by Linear Integrated Systems is believed to be accurate and reliable. However, no responsibility is assumed for its use; nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Linear Integrated Systems. Linear Integrated Systems (LIS), established in 1987, is a third-generation precision semiconductor company providing high-quality discrete components. Expertise brought to LIS is based on processes and products developed at Amelco, Union Carbide, Intersil and Micro Power Systems by company Founder John H. Hall. Hall, a protégé of Silicon Valley legend Dr. Jean Hoerni, was the director of IC Development at Union Carbide, Co-Founder and Vice President of R&D at Intersil, and Founder/President of Micro Power Systems. Linear Integrated Systems • 4042 Clipper Court • Fremont, CA 94538 • Tel: 510 490-9160 • Fax: 510 353-0261 Doc 201126 02/03/2021 Rev#A10 ECN# J500 Series